Conditions for Direct Scrapping of Bailey Bridge Components
Nov 17, 2026
Leave a message
If any of the following conditions occurs, the component shall not proceed to the inspection acceptance process and shall be removed or scrapped:
- Cracks in the steel material or welds;
- Severe wear of pin holes, with ovalization, making it impossible to restore normal fit;
- Severe corrosion, with large flakes of rust falling off on touch, or corrosion reaching Grade S5 or above;
- Twisting or bending that cannot be straightened or restored, or cracks detected by non-destructive testing after straightening;
- The material or specifications of the component do not conform to the design drawings or the requirements of JT/T 728.

