321 Steel Deck Shall Have Several Clamps For Erection Of The Transom

The 321 steel deck are made of crossbeams: 4 sets of clamps on the crossbeams are used to restrict the position of the longitudinal beams. The two ends are welded with short columns, which are used to connect the inclined braces. The bottom surface of both ends has 3 depressions. To install the beam, place the sunken eye in the stud on the bottom chord-beam plate of the frame to position the beam on the frame. The distance of the depression is the same as that of the frame. After the beam is in place, the distance of the frame is relatively fixed. Beam fixture; The transom fixture is composed of three parts: the tie rod, cantilever and frame. Used to fix the transom.