Rust removal treatment of steel helmet plates

Jun 16, 2025

Leave a message

Rust Removal Treatment:
Determine Rust Grade: Assess the degree of rusting (light rust, medium rust, heavy rust) in accordance with standards such as GB/T 8923.
Select Rust Removal Method:
Manual/Power Tool Rust Removal (St2, St3): Suitable for local rusting, maintenance, or situations where blasting is not feasible. Use tools such as chisels, wire brushes, sandpaper, angle grinders with wire wheels or grinding discs. Ensure all loose scale, rust, and dirt are removed, revealing a metallic luster (St3 grade).
Sandblasting/Shot Blasting Rust Removal (Sa2.5, Sa3): Recommended method, especially for extensive rusting and storage maintenance. Completely removes all scale, rust, and dirt, providing a uniformly rough and clean metal surface (Sa2.5 grade is "very thorough", Sa3 grade is "making the steel surface appear clean"). This is crucial for achieving the best paint adhesion. Operations should be conducted in a closed environment with proper protection.
Cleanliness: The surface after rust removal must be free of oil, grease, and dust. Clean with a clean cloth or compressed air.
Anti-corrosion Painting (Important):
Environmental Requirements: Perform in a clean, dry, well-ventilated area with suitable temperature and humidity (as per paint instructions). Avoid painting in rainy, snowy, windy, or high-humidity conditions.
Primer: Apply high-quality anti-rust primer (such as epoxy zinc-rich primer, inorganic zinc-rich primer) as soon as possible after rust removal (generally within 4-8 hours, shorter in high-humidity environments). The primer is crucial for corrosion prevention and must cover all metal surfaces, especially corners, welds, and edges. Reach the specified film thickness.
Intermediate Coat (Optional but Recommended): For harsh environments or long-term corrosion protection, apply an intermediate coat (such as epoxy mica intermediate coat) after the primer dries to enhance shielding and thickness.
Topcoat: After the primer and intermediate coat are fully cured (as per instructions), apply a weather-resistant topcoat (such as polyurethane topcoat, fluorocarbon topcoat). The topcoat provides final protection and appearance. Common colors are military green or engineering yellow for easy identification and management. Reach the specified film thickness.
Painting Requirements: The paint film should be uniform, continuous, without missed areas, sagging, bubbling, or pinholes. The total dry film thickness is typically required to be ≥120μm - 200μm, depending on the usage environment and design life. The inner walls of connection holes and contact surfaces should also be painted (but be mindful of the friction coefficient requirements for bolted connections, sometimes special treatment or no painting is needed).
Repairs: For paint film damage caused during transportation, storage, or installation, promptly repair following the above steps (cleaning, rust removal, applying primer, and topcoat).

Send Inquiry