Steel platform design
Mar 14, 2024
Leave a message
Steel platform and support is something that can not be avoided, simple steel platform is used as the operating surface, steel support for the pipeline. Steel platform design according to the actual needs of different spans composed of various types and various uses of temporary Bridges. There are four bolt holes in the upper chord for connecting the support frame, and the two holes in the middle are for connecting the double or multiple rows of trusses with the section.

On the hole steel plate for welding, there are bolt holes in the lower chord rod for connecting with the reinforced chord rod and the double-layer truss, and the two holes near the two ends are used for connecting between the joints. If the beam or column is used, the joint of the upper and lower Beret sections must be strengthened with a support frame. Grease around the pin to prevent rain from entering the pin holes. Grease all exposed threads of bolts to prevent rust.
The longitudinal beam and the connecting piece are fixed and formed to the width of the bridge panel, and the cast-in-place cover plate bottom mold is laid. The bottom mold laying shall ensure the flatness of the plate surface. The steel bar of the cover plate shall be constructed according to the calculation requirements of the structural reinforcement. The cover plate and the upper retaining wall of the crown beam should be spaced to prevent the steel plate from thermal expansion and cold contraction to damage the reinforced concrete retaining wall, and be blocked with asphalt to prevent rainwater infiltration.

