Precautions For The Design And Installation Of Bailey Frames
Apr 03, 2025
Leave a message
Load Calculation:
Detailed structural calculations must be carried out, taking into account static loads, dynamic loads, impact coefficients, etc.
A sufficient safety factor (usually no less than 1.5) should be reserved, and environmental factors such as wind loads and water flow impacts should be considered.
Foundation Requirements:
The bearing capacity of the foundation must meet the design requirements. The abutment foundation should be stable to prevent uneven settlement. Soft soil foundations need to be reinforced.
Installation Specifications:
Installation must be carried out strictly in accordance with the design drawings and construction plans. Professional lifting equipment should be used to avoid rough handling. Ensure that all pins and bolts are installed in place and securely locked.
Daily Inspection:
Regularly check if the connection parts are loose, observe if there is any abnormal deformation in the structure, and check if the anti-corrosion layer is intact.
Load Control:
Overloading is strictly prohibited. Control the speed and spacing of vehicles. Do not concentrate loads. Environmental Use: Assess the safety of passage during strong winds. Strengthen monitoring during floods. Pay attention to de-icing and anti-skid in winter.

